All papers and other publications are available at Greg's Research Gate page or email Greg to request a particular paper.

Peer Reviewed Journal Papers

White, G 2016, ‘Grading of Australian bitumen by multiple stress creep recovery’, Road & Transport Research, article-in-press.

White, G 2016, ‘The impact of Hisingerite on asphalt shear resistance’, Road Materials and Pavement Design, article-in-press, doi: 10.1080/14680629.2016.1159244

White, G 2016, ‘Limitations and potential improvement of the aircraft pavement strength rating system’, International Journal of Pavement Engineering and Asphalt Technology, article-in-press, doi: 10.1080/10298436.2016.1155122.

White, G, Tighe, S, Emery, S & Yeaman, J 2016, ‘Developing a framework for diagnosis of shear distress in asphalt surfaces’, International Journal of Pavement Engineering, article-in-press, doi: 10.1080/10298436.2016.1141413.

White, G 2016, ‘Shear Stresses in an Asphalt Surface under Various Aircraft Braking Conditions’, International Journal of Pavement Research and Technology, vol. 9, pp. 89-101.

White, G & Gabrawy, T 2016, ‘Airport asphalt surface interface shear resistance’, International Journal of Pavement Engineering and Asphalt Technology, vol. 17, no. 1, article-in-press.

White, G 2016, ‘Asphalt Tenderness in an Australian Runway Overlay’, Transportation Geotechnics, vol. 6, pp. 66-74.

White, G 2015, ‘State of the Art: Interface Shear Resistance of Asphalt Surface Layers’, International Journal of Pavement Engineering, article-in-press , doi: 10.1080/10298436.2015.1126270.

White, G 2015, ‘The Multiple stress creep recovery test for airport asphalt binders’, Road & Transport Research, vol. 24, no. 3, pp. 24-34.

White, G 2015, ‘Inter-batch and Inter-feedstock Variability of an Acid Modified Bitumen’, Road Materials and Pavement Design, article-in-press, doi: 10.1080/14680629.2015.1108220.

White, G 2015, ‘Shear Creep Response of an Airport Asphalt Mastic’, International Journal of Pavement Engineering, article-in-press, doi: 10.1080/10298436.2015.1095914.

White, G 2015, ‘Warm Mix Asphalt for Australian Airports’, International Journal of Pavement Engineering and Asphalt Technology,  vol. 16,  no. 1, pp. 11-29.

White, G 2015, ‘The Effect of Aircraft Traffic on the Structure and Response of Asphalt’, Transportation Geotechnics, vol. 2, pp. 56-64.

White, G & Gnanendran, C, T 2005, ‘The Influence of Compaction Method and Density on the Strength and Modulus of Cementitiously Stabilised Pavement Materials’, International Journal of Pavement Engineering, vol. 6, no. 2, pp. 97-110.

White, G & Gnanendran, C, T 2005, ‘The characterisation of cementitious insitu stabilised pavement materials: The past, the present and the future’, Road and Transport Research, vol. 11, no. 4, pp. 56-69.

White, G & Allman, M 2000, ‘A Review of joint sealant standards and specifications for aircraft pavements’, Road and Transport Research, vol. 9, no. 2, pp. 3-13.

Peer Reviewed Conference Papers

White, G 2016, ‘Impac t of new high inflation pressure aircraft tyres on asphalt overlay interface debonding’, 8th RILEM Conference on Mechanisms of Cracking and Debonding in Pavements, Nantes, France, 7-9 July.

White, G & Gabrawy, T 2016, ‘Advanced characterisation methods for interface shear resistance for airport overlays’, 8th RILEM Conference on Mechanisms of Cracking and Debonding in Pavements, Nantes, France, 7-9 July.

White, G 2016, ‘The contribution of asphalt mastic to shear resistance’, 6th Eurasphalt & Eurobitume Congress’, Prague, Czech Republic, 1-3 June.

White, G & Thompson, M 2016, ‘Australian airport asphalt surface treatments’, 6th Eurasphalt & Eurobitume Congress’, Prague, Czech Republic, 1-3 June.

White, G 2015, ‘Adequacy of Runway Asphalt Overlay Interface Construction’, 16th AAPA International Flexible Pavement Conference, Gold Coast, Queensland, Australia, 13-16 September.

White, G & Embleton, K 2015, ‘Next Generation Binder for Airport Asphalt’, 16th AAPA International Flexible Pavement Conference, Gold Coast, Queensland, Australia, 13-16 September.

White, G 2014, ‘Cyclic Shear Deformation of Asphalt at Melbourne Airport’, FAA World Wide Airport Technology Transfer, Galloway, New Jersey, USA, 5-7 August.

White, G 2014, ‘Statistical Analysis of In-Service Evolution of an Airport Asphalt Surfacing’, FAA World Wide Airport Technology Transfer, Galloway, New Jersey, USA, 5-7 August.

White, G 2014, ‘Verification of Warm Mix Asphalt as a Runway Surfacing for Australian Airports’, 13th International Conference on Pavement Engineering and Infrastructure, Liverpool, England, UK, 26-27 February.

White, G 2013, ‘Developing Warm Mix Asphalt for Airport’, 15th International Flexible Pavement Conference, Brisbane, Queensland, Australia, 22-25 September.

White, G 2010, ‘Spray Seals for Airports’, 2nd International Sprayed Sealing Conference, Melbourne, Victoria, Australia, 10-12 October.

White, G 2009, ‘A Probabilistic Approach to Flexible Aircraft Pavement Thickness Determination’, 8th International Bearing Capacity of Road, Railways and Airfields Conference, Champaign, Illinois, USA, 29 June to 2 July, pp. 889-895.

White, G 2008, ‘Recalibration of Airport Pavement Structural Design System’, 2008 Airfield and Highway Pavements Specialty Conference, Seattle, Washington, USA, 16-18 October.

White, G 2008, ‘Developments in Proof Rolling of Granular Layers in Aircraft Pavements in Australia’, 6th International Conference on Road and Airfield Pavement Technology, Sapporo, Japan, 20-23 July.

White, G 2008, ‘Lessons Leant from Ten Years of Maintenance on Defence Aircraft Pavements in Australia’, 7th International Conference on Managing Pavement Assets, Calgary, Alberta, Canada, 24-28 June.

White, G 2008, ‘Pavement Options for an Airport Parking Apron at an International Airport in Australia’, 7th International Conference on Managing Pavement Assets, Calgary, Alberta, Canada, 24-28 June.

White, G 2008, ‘Use of Fuel Resistant Asphalt for Aircraft Pavement Surfaces in Australia’, 2007 AAPA Pavements Industry Conference, Sydney, New South Wales, Australia, 22-24 October.

White, G 2008, ‘Bituminous Surfaced Pavement Maintenance for Remote Airfields in Australia’, 2007 AAPA Pavements Industry Conference, Sydney, New South Wales, Australia, 22-24 October.

White, G 2008, ‘Towards Calibration of APSDS for Six Wheel Gear Loads’, 2007 FAA Worldwide Airport Technology Conference and Exposition, Atlantic City, New Jersey, USA, 15-18 April.

White, G & McCullagh, P 2006, ‘Upgrade of an Australian Defence Airfield for the Introduction of Code E Aircraft’, 2006 Airfield and Highway Pavements Specialty Conference, Atlanta, Georgia, USA, 1-3 May.

White, G 2006, ‘Material Equivalence for Flexible aircraft Pavement Thickness Design’, 2006 Airfield and Highway Pavements Specialty Conference, Atlanta, Georgia, USA, 1-3 May.

White, G 2005, ‘Design of Proof Rolling Regimes for Heavy Duty Aircraft Pavements’, 7th International Conference on the Bearing Capacity of Roads, Railways and Airfields, Trondheim, Norway, 27-29 June.

White, G 2005, ‘Selection of Input Parameters for Layered Elastic Design of Flexible Aircraft Pavements’, 7th International Conference on the Bearing Capacity of Roads, Railways and Airfields, Trondheim, Norway, 27-29 June.

White, G & Gnanendran, C 2005, ‘Characterisation of Cementitiously Stabilised Pavement Materials – The Australian Experience’, 7th International Conference on the Bearing Capacity of Roads, Railways and Airfields, Trondheim, Norway, 27-29 June.

White, G 2005, ‘A Sensitivity Analysis of APSDS, an Australian Mechanistic Design Tool for Flexible Aircraft Pavement Thickness Determination’, First European Aircraft Pavement Workshop, Amsterdam, Netherlands, 11-12 May.

White, G & Gnanendran, C 2003, ‘Variability in unconfined compression strength of pavement materials stabilised with cementitious binders’, 21st ARRB Transport Research and 11th Road Engineering Association of Asia and Australia Conference, Cairns, Queensland, Australia, 18-23 May.

White, G & Allman, M 2001, ‘Performance Evaluation of Joint Sealants for Aircraft Pavements’, Proceedings 20th ARRB Conference, Melbourne, Victoria, Australia, 19-21 March.

Other Papers and Invited Presentations

White, G 2016, ‘Modification of the ACN-PCN system for the protection of asphalt runway surfaces from more demanding aircraft’ 10th Airfield Pavement Engineering and Maintenance Conference, Mount Elizabeth, Singapore, 17-20 May.

White, G 2016, ‘Bitumen for airfield asphalt: understanding and managing variability and quality’ Airfield Pavement Engineering and Maintenance Conference, Mount Elizabeth, Singapore, 17-20 May.

White, G 2016, ‘Asphalt surface shear creep and distress’, Continuing professional development seminar on airfield engineering, University of the Sunshine Coast, Sippy Downs, Queensland, Australia, 4-6 May.

White, G 2016, ‘Future research needs for Australian airports’, Continuing professional development seminar on airfield engineering, University of the Sunshine Coast, Sippy Downs, Queensland, Australia, 4-6 May.

White, G 2016, ‘Managing bitumen variability and quality for airfield pavements and the implications for airport asphalt surfaces’ 9th Airfield Pavement Engineering and Maintenance Conference, Dubai, United Arab Emirates, 1-4 February.

White, G 2016, ‘ACN-PCN systems for changing aircrafts: how to better protect your runways through ACN-PCN modifications’ 9th Airfield Pavement Engineering and Maintenance Conference, Dubai, United Arab Emirates, 1-4 February.

White, G 2016, ‘Maintaining Bleeding & Flushed Airfield Pavements’ 9th Airfield Pavement Engineering and Maintenance Conference, Dubai, United Arab Emirates, 1- February.

White, G 2015, ‘ACN-PCN System and Higher Aircraft Tyre Pressures and Wheel Loads: The Impacts for Airports into the Future’, Australian Airports Association National Conference, Australian Airports Association, Hobart, Tasmania, Australia, 12-16 October.

White, G 2015, ‘A National Specification for Airport Sealing’, 16th AAPA International Flexible Pavement Conference, Australian Asphalt Pavement Association, Gold Coast, Queensland, Australia, 13-16 September.

White, G 2015, ‘Systematic Diagnosis of Factors Leading to Cyclic Shear Creep of Airport Asphalt Surfaces’, Final PhD Seminar, University of the Sunshine Coast, Sippy Downs, Queensland, Australia, 12 August.

White, G 2015, ‘Airport Asphalt Overlays’, Fulton Hogan NSW Technical Seminar, Fulton Hogan Australia, Tamworth, New South Wales, Australia, 14 July.

White, G 2015, ‘Spray Sealing for Australian Airports’, Fulton Hogan NSW Technical Seminar, Fulton Hogan Australia, Tamworth, New South Wales, Australia, 14 July.

White, G 2015, ‘Asphalt Overlay Bond Strength’, Airfield Pavement and Lighting Forum, Australian Airports Association, Sydney, New South Wales, Australia, 29 April-1 May.

White, G 2015, ‘Development of an Airport Spray Seal Design Method’, Airfield Pavement and Lighting Forum, Australian Airports Association, Sydney, New South Wales, Australia, 29 April-1 May.

White, G 2015, ‘The Systematic Investigation of Cyclic Shear Creep of the Asphalt Surface at an Australian Airport’, Confirmation Seminar, University of the Sunshine Coast, Sippy Downs, Queensland, Australia, 24 March.

White, G 2014, ‘New Airport Pavement Technologies from the USA’, Australian Airports Association National Conference, Australian Airports Association, Gold Coat, Queensland, Australia, 23-27 November.

White, G & Rodway, B 2014, ‘Distress and Maintenance of Grooved Runway Surfaces’, Airfield Engineering and Maintenance Summit, Equip Global, Furama Riverfront, Singapore, 25-28 March.

White, G 2014, ‘Foamed Bitumen Stabilisation for Australian Airports’, Airfield Engineering and Maintenance Summit, Equip Global, Furama Riverfront, Singapore, 25-28 March.

White, G 2013, ‘Warm Mix Asphalt’, AAA National Convention 2013, Australian Airports Association, Darwin, Northern Territory, Australia, 17-20 September.

White, G 2013, ‘Challenges for Spray Sealing of Airports’, Airfield Pavement and Lighting Forum, Australian Airports Association, Brisbane, Queensland, Australia, 16-17 April.

White, G 2013, ‘Airports Technical Lessons Learned & New Opportunities’, Technical Seminar, Fulton Hogan Australia, Sydney, New South Wales, Australia, 4 May.

White, G 2012, ‘Pavement Surface Friction Testing for Airports’, Australian Airports Association National Convention, Australian Airports Association, Melbourne, Victoria, Australia, 15-16 November.

White, G, W 2004, ‘Aircraft Pavement Engineering – A Technology Update’, GHD Biennial Aviation Services Technical Forum, GHD Australia, Brisbane, Queensland, Australia, 18-19 June.

White, G, W 2002, ‘The effect of binder type, content and host material on cementitiously stabilised pavement material strength’, School of Civil Engineering Research Day, University of New South Wales, Canberra, Australian Capital Territory, Australia, 2 November.

Theses and Dissertations

White, G, W 2015, Systematic Diagnosis of Factors Leading to Cyclic Shear Creep of Airport Asphalt Surfaces, A Dissertation submitted to the Faculty of Science, Health, Education and Engineering, University of the Sunshine Coast, for the Award of Doctor of Philosophy, August.

White, G, W 2007, An Investigation of the Australian Layered Elastic tool for Flexible Aircraft Pavement Thickness Design, A Thesis submitted to the Faculty of Built Environment and Engineering, Queensland University of Technology, for the Award of Master of Engineering, July.

White, G, W 2006, Laboratory Characterisation of Cementitiously Stabilised Pavement Materials, A Thesis submitted to the School of Aerospace, Civil & Mechanical Engineering, University of New South Wales at the Australian Defence force Academy, for the Award of Master of Engineering, August.

White, G 1999, Aircraft Pavement Joint Sealants – Standards, Specifications and Materials, A Thesis submitted to the Department of Civil Engineering, University of Newcastle, for the Award of Master of Engineering in Civil Engineering, December.

White, G, W 1997, Investigation of Fuel Farm Contamination at RAAF Base Williamtown, A Thesis submitted to the University of New South Wales at the Australian Defence force Academy, for partial completion of Bachelor of Civil Engineering, October.