Airport Pavement Engineering Specialists

Email: greg@apes.net.au
Phone: +61 400 218 048

Publications:

Recent major projects:

All papers and other publications are available at Greg's Research Gate page or email Greg to request a particular paper.

Contact Greg:

Services:

Resume:

Dr. Greg White is the sole director and proprietor of APES and also holds the position of Director of the Airport Pavement Research Program at the University of the Sunshine Coast. Following a career as an Airfield Engineering Officer in the Royal Australian Air Force, Greg worked for a number of leading Australian design consultants as a Principal Airport Pavement Engineer and then as the Technical Manager Airports for construction and surfacing company Fulton Hogan. In 2016 Greg established APES in order to provide specialist independent advice to the airport industry. Greg holds a number of Masters level degrees, as well as a PhD, all earned in the area of pavement materials and engineering. Greg is one of Australia’s most experienced and qualified airport pavement engineers and researchers.

Independent and specialised advice and support to airports, consultants and contractors, covering all aspects of airport pavement engineering and research:

Independent review of project level documentation and contracts.
Inspection and reporting of pavement condition, maintenance requirements and distress.
High level advice to airports embarking on significant upgrade or maintenance projects.
Forensic investigation of defects in support of dispute resolution.
Development and review of policies and practices for pavement design and construction.
Independent evaluation of new materials, products, treatments and technologies.
Expert witness services.
Project-level and airport-specific innovation support.

Greg's CV is available for download here.

Greg's academic qualifications include:

Doctor of Philosophy, University of Sunshine Coast, 2015
Master of Engineering, Queensland University of Technology, 2008
Master of Engineering, University of New South Wales, 2007
Master of Technology (Pavements), Deakin University, 2002
Master of Engineering, University of Newcastle, 2000
Bachelor of Engineering (Civil, Honours 1), University of New South Wales, 1997
Graduate Certificate of Applied Statistics, Murdoch University, 2005
Chartered Professional Engineer, Engineering Australia, since 2000

Projects in 2021

Technical advisor for runway resurfacing, Groote Eylandt Airport

Technical advisor for airport pavement upgrades and expansion, Cessnock Airport

Specialist pavement engineer for runway strength upgrade design, Cooktown Airport

Technical specialist for the review of the pavement strength ratings, Norfolk Island Airport

Technical advisor for pavement rehabilitation program, Townsville Airport

Technical advisor for pavement maintenance planning, Groote Eylandt Airport

Designer and technical supervisor of cross runway resealing, Mudgee Airport

Technical specialist for General Aviation pavement rehabilitation, Dubbo Airport

Technical specialist for all aircraft pavement strength assessment, Cairns Airport

Independent expert witness for legal dispute regarding concrete apron cracking, Queensland, Australia

Projects in 2020

Designer and technical supervisor of cross runway resealing, Narrandera Airport

Technical advisor for runway upgrade concept design, Ballina Airport

Technical advisor for contractor’s alternate designs, Hervey Bay Airport

Designer and technical supervisor of cross runway resealing, Rockhampton Airport

Technical specialist on advising on pavement condition and strength, Latrobe Airport

Independent expert and advisor to the contractor for asphalt distress investigation, Bonriki (Kiribati) Airport

Technical advisor and designer for runway extension and strengthening, Merimbula Airport

Technical advisor and construction supervisor for asphalt resurfacing, Shellharbour Airport

Technical advisor for construction phase, Maranoa airfield resealing works

Pavement condition and valuation/depreciation, Dubbo and Wellington Airports

Specialist advisor on asphalt defects, Sunshine Coast Airport Expansion Project

Independent review of pavement designs and asphalt surfacing, Shellharbour Airport

Construction phase technical advisor for airfield overlay and upgrade, Norfolk Island Airport

Independent forensic investigation of non-compliant runway pavement, Julia Creek Airport

Construction phase technical advisor for runway and overlay, Cairns Airport

Projects in 2019

Independent expert to the contractor on pavement defects, Jeddah Airport, Saudi Arabia

Pavement specialist for runway resealing, Parkes Airport

Specialist Pavement Engineer for runway extension and overlay, Merimbula Airport

Technical Advisor for construction phase runway resurfacing and taxiway rebuilds, Alice Springs Airport

Pavement specialist for runway and taxiway resealing, Dubbo Airport

Technical advisor and pavement specialist to the runway strengthening project, Emerald Airport

Specialist pavement engineer for maintenance and resurfacing planning, Bundaberg Airport

Technical specialist of sprayed sealed for runway resurfacing, Ravensthorpe Airport

Technical advisor and pavement specialist for runway strengthening and apron expansion, Weipa Airport

Independent forensic investigation and pavement specialist, Kangaroo Island airport

Technical advisor and pavement specialist to the runway resurfacing project, Cairns Airport

Projects in 2018

Technical drafter for standardised airport sprayed sealing specification, for AAA and AAPA

Specialist pavement engineer for preliminary pavement upgrade design, King Island Airport

Independent review of runway upgrade design, Emerald Airport

Pavement designer and site attendance for spray sealing, Archerfield Airport

Technical advisor for planning phase of runway overlay, Cairns Airport

Independent review of construction quality issues for asphalt surfacing, Mildura Airport

Pavement engineer for preliminary design for further upgrades and expansion, Dubbo Airport

Specialist pavement engineer to Rio Tinto for maintenance, Weipa airport

Technical specialist for non-compliant crushed rock grading evaluation, RAAF Edinburgh

Pavement engineer for taxiway and apron reconstruction, Parkes Airport

On-site technical advisor to the client for the asphalt overlay, Dubbo Airport

Specialist advisor for the rehabilitation of all airfield pavements at Norfolk Island Airport

Specialist pavement engineer for runway resealing design, Ravensthorpe Airport

Client’s specialist pavement advisor, new runway development project, Sunshine Coast Airport

Pavement engineer and technical advisor, Rockhampton Airport runway overlay project

Projects in 2017

Technical advisor for runway asphalt stripping rectification, RAAF Williamtown

Runway distress investigation and overlay technical advisor, Alice Springs Airport

Contractor’s technical advisor (tender phase), runway overlay and taxiway reconstruction, Samoa

Expert Witness, runway and taxiway asphalt surfacing dispute, major airport in the United Kingdom

Coondewanna Airport, Pavement designer, runway upgrade, remote Western Australia, technical specialist

Independent expert for investigation of defective taxiway asphalt in Northern Territory, technical expert

Post-flood inspection of Rockhampton Airport runway, specialist pavement engineer

Melbourne Airport, runway development project, tenderer’s specialist pavement advisor

Mount Isa surface enrichment and taxiway widening works, independent design reviewer

Independent expert for investigation of defective taxiway asphalt in North Queensland, technical expert

Independent expert for legal dispute on a rigid airport apron in Queensland, technical expert

Introduction to Airport Pavements Airport Practice Note, for the Australian Airports Association, lead author

Brisbane Airport, new parallel runway, tenderer’s specialist pavement advisor

Independent expert for legal dispute on a Perth Highway, technical expert

Orange Airport, runway reseal, designer and specialist technical supervision

Mildura Airport, runway extension and strengthening overlay, airport’s specialist technical advisor

Projects in 2016

Mildura airport runway extension and asphalt overlay, independent design reviewer and client’s advisor

Cairns Airport, taxiway overlay, independent review of asphalt non-compliances

Devonport Airport, runway overlay, Design and Construct, lead designer

Brisbane Airport, runway overlay, technical advisor

Gladstone Airport, inspection and rejuvenation planning

Dubbo Airport, runway upgrade and overlay, specialist advisor to the owner

Proserpine Airport, runway upgrade and airport expansion, specialist advisor to the owner

Projects in 2015

Gold Coast Airport, runway overlay, technical advisor

Barimunya Airport, reconstruction and asphalt surfacing, Design and Construction, lead designer

Cairns Airport, runway cracking inspection and advice

Gold Coast Airport, runway resurfacing, distress investigator and technical advisor

Koolan Island Airport, new airfield Design and Construction, tender design manager and pavement lead

Cooma Airport, airport upgrade planning, inspection and concept design report

Major Projects Prior to 2015

Barimunya and Coondewanna Airports, resealing, Design and Construction, lead designer

RAAF Woomera, runway overlay and apron reconstruction, technical advisor and alternate design lead

Dubbo Airport, runway reseal, technical advisor and construction supervisor

Brunei Airport, complete airfield upgrade, Design and Construct, tender design manager

Melbourne Airport, runway distress investigation, researcher and investigator

RAAF Darwin, taxiway widening, technical advisor and alternate design lead

Brisbane Airport, runway overlay, technical advisor

St George Airport, runway reconstruction and seal, design manager and lead designer

Moranbah Airport, apron and runway inspection and upgrade scope, design lead

Cocos Island Airport, runway upgrade and reseal, technical advisor and construction supervisor

Melbourne Airport, Taxiway F and Southern apron concrete construction, technical advisor

RAAF Peace, Gin Gin and Oakey, runway overlays, technical advisor

Defence airfield maintenance program, technical advisor and part-time site supervisor

Adelaide Airport, runway overlay, technical advisor

Olympic Dam Airport, new airport development, site selection and concept design, design manager

Melbourne Airport, runway overlay, technical advisor

Moomba Airport, runway overlay, technical advisor and alternate design lead

RAAF Williamtown, fighter apron development, pavement designer and design manager

Defence airfields upgrade for new refuelling aircraft, project manager and design lead

Perth Airport, concrete apron reconstruction, technical advisor

RAAF Pearce, taxiway and parking apron reconstruction, lead designer and construction supervisor

Sydney Airport, apron reconstruction and runway overlay, pavement designer

Defence airfield maintenance program, project manager, lead designer and construction supervisor

RAAF Amberley, airfield upgrade and new apron construction, design team member

Peer Reviewed Journal Papers

White, G, Ward, C & Jamieson, S 2021, ‘Field evaluation of a handheld laser meter for pavement surface macro texture measurement’, International Journal of Pavement Engineering, vol. 22, no.8, pp. 950-959.

Jamshidi, A, White G & Hosseinpour, M 2021, ‘Revisiting the correlation between the dynamic modulus and the flexural modulus of hot mixture asphalt’, Construction and Building Materials, vol. 296, no. 123697, pp 1-13.

Jamshidi, A, White, G, Van den bergh, W, Omranian, SR & Hamaz, MO 2021, ‘Development of a Matrix Analysis Methodology for Characterization of Short-Term Aging in Asphalt Binders Modified by Synthetic Wax’, Sustainability, vol. 13, no. 5784, pp. 1-14.

Jamieson, S. & White, G. 2021, ‘Laboratory evaluation of the performance of stone mastic asphalt as an ungrooved runway surface’, Materials, vol.14, no. 502, pp. 1-18.

White, G. & Weir, T. 2021, ‘Implications of different foamed bitumen stabilization production and curing processes on airport pavement thickness and life’, Sustainable Issues in Infrastructure Engineering, Shehata, H. & El-Badawy, S, (Eds.), vol. 2, pp. 107-126.

White, G. & Fergusson, K. 2021, ‘Exploring the durability specification of coarse aggregate used in airport asphalt mixtures’, Sustainable Issues in Infrastructure Engineering, Shehata, H. & El-Badawy, S, (Eds.), vol. 2, pp. 207-224.

White, G. 2020, ‘A synthesis of the effects of two commercial recycled plastics on the properties of bitumen and asphalt’, Sustainability, vol. 12, no. 8594, pp. 1-20.

White, G & Espinosa, R 2020, ‘Laboratory Evaluation of Gradation Improvement of Marginal Materials for Foamed Bitumen Stabilization’, Applied Sciences, vol. 10, no. 4224, pp. 1-13.

White, G & Almutairi, H 2020 ‘Laboratory and field performance comparison of dense graded and stone mastic asphalt as a runway surface’, International Journal of Pavement Engineering, article-in-press.

Deilami, S & White, G 2020, ‘Review of reflective cracking in composite pavements’, International Journal of Pavement Research and Technology, no. 13, pp. 524–535.

White, G 2020, ‘Stochastic strength rating of flexible airport pavements using construction data’, International Journal of Pavement Engineering, vol. 21, no. 4, pp. 537-548.

Jamieson, S & White, G 2020, ‘Review of stone mastic asphalt as a high performance ungrooved runway surfacing’, Road Materials and Pavement Design, vol. 21, no. 4, pp. 886-905.

Jamshidi, A & White, G 2020, ‘Evaluation of performance of challenges of use of waste materials in pavement construction: a critical review’, Applied Sciences, vol. 10, no. 226, pp. 1-13.

White, G 2020, ‘Incorporating binder type into fatigue life characterisation of airport pavement surfaces’, International Journal of Pavement Research and Technology, no. 13, pp. 40-47.

White, G & Magee, C 2019, ‘Laboratory evaluation of asphalt containing recycled plastic as a bitumen extender and modifier’, Journal of Traffic and Transportation Engineering, vol. 7, no. 5, pp. 218-235.

White, G 2019, ‘Evaluation of a non-nuclear density gauge as an alternate to destructive coring for airport asphalt acceptance testing’, SN Applied Science, vol. 1, no. 921, pp. 1-14.

White, G & Jamshidi, A 2019, ‘Resetting dense graded airport asphalt production and construction tolerances’, International Journal of Construction Management, article-in-press.

Jamshidi, A, White, G, Hosseinpour, M, Kurumisawa, K & Hamzah, MO 2019, ‘Characterization of effects of reclaimed asphalt pavement (RAP) source and content on dynamic modulus of hot mix asphalt concrete’, Construction and Building Materials, no. 217, pp. 487-497.

Jamieson, S & White, G 2019, ‘Improvements to the Australian wheel tracking protocol for asphalt deformation resistance measurement’, Australian Geomechanics, vol. 54, no. 2, pp. 113-121.

White, G 2019, ‘Modification of the airport pavement strength rating system for improved protection of asphalt surfaces’, International Journal of Pavement Engineering, vol. 20, no. 5, pp. 519-529.

Jamshidi, A, Kurumisawa, K, White, G, Nishizawa, T, Igarashi, T, Nawa, T & Mao, J 2019, ‘State-of-the-art of interlocking concrete block pavement technology in Japan as a post-modern pavement’, Construction and Building Materials, no. 200, pp. 713-755.

White, G 2019, ‘Quantifying the impact of reclaimed asphalt pavement on airport asphalt surfaces’, Construction and Building Materials, no. 197, pp. 757-765.

White, G, Fairweather, H & Jamshidi, A 2018, ‘Sustainable runway pavement rehabilitation: a case study of an Australian airport’, Journal of Cleaner Production, vol. 204, pp. 380-389.

Jamshidi, A, White, G, Kurumisawa, K, Nawa, T, Igarashi, T & Hamzah, MO 2018, ‘Estimating correlations between rheological characteristics, engineering properties, and CO2 emissions of warm-mix asphalt’, Journal of Cleaner Production, no. 189, pp. 635-646.

White, G 2018, ‘State of the Art: Asphalt for Airport Pavement Surfacing’, International Journal of Pavement Research and Technology, vol. 11, no. 1, pp. 77-98.

White, G & McCallum, A 2018, ‘Review of snow and ice runways’, International Journal of Pavement Research and Technology, vol. 11, no. 3, pp. 311-320.

White, G 2017, ‘Shear creep response of an airport asphalt mastic’, International Journal of Pavement Engineering, vol. 18, no. 7, pp. 567-577.

Jamshidi, A, Kurumisawa, K, Nawa, T, Jize, M & White, G 2017, ‘Performance of pavements incorporating industrial byproducts’, Journal of Cleaner Production, no. 164, pp. 367-388.

White, G 2017, ‘The impact of Hisingerite on asphalt shear resistance’, Road Materials and Pavement Design, vol. 18, no. 1, pp. 235-249.

White, G 2017, ‘Technical Note: The impact of rainfall during asphalt paving operations’, International Journal of Pavement Engineering and Asphalt Technology, vol. 17, no 2, pp. 22-27.

White, G 2017, ‘State of the art: interface shear resistance of asphalt surface layers’, International Journal of Pavement Engineering, vol. 18, no. 10, pp. 887-910.

White, G 2017, ‘Limitations and potential improvement of the aircraft pavement strength rating system’, International Journal of Pavement Engineering, vol. 18, no. 12, pp. 1111-1121.

White, G, Tighe, S, Emery, S & Yeaman, J 2017, ‘Developing a framework for diagnosis of shear distress in asphalt surfaces’, International Journal of Pavement Engineering, vol. 18, no. 12, pp. 1039-1051.

White, G 2017, ‘Grading highly modified binders by multiple stress creep recovery’ Road Materials and Pavement Design, vol. 18, no. 6, pp. 1322-1327.

White, G 2016. ‘Challenges for Australian flexible airport pavements’, Australian Geomechanics, vol. 51, no. 3, pp. 39-46.

White, G 2016, ‘Shear stresses in an asphalt surface under various aircraft braking conditions’, International Journal of Pavement Research and Technology, vol. 9, pp. 89-101.

White, G & Gabrawy, T 2016, ‘Airport asphalt surface interface shear resistance’, International Journal of Pavement Engineering and Asphalt Technology, vol. 17, no. 1.

White, G 2016, ‘Inter-batch and Inter-feedstock variability of an acid modified bitumen’, Road Materials and Pavement Design, vol. 17, no. 3, pp. 658-677.

White, G 2016, ‘Asphalt tenderness in an Australian runway overlay’, Transportation Geotechnics, vol. 6, pp. 66-74.

White, G 2015, ‘Grading of Australian bitumen by multiple stress creep recovery’, Road & Transport Research, vol. 24, no. 4, pp. 30-44.

White, G 2015, ‘Warm mix asphalt for Australian airports’, International Journal of Pavement Engineering and Asphalt Technology, vol. 16, no. 1, pp. 11-29.

White, G 2015, ‘The Multiple stress creep recovery test for airport asphalt binders’, Road & Transport Research, vol. 24, no. 3, pp. 24-34.

White, G 2015, ‘The effect of aircraft traffic on the structure and response of asphalt’, Transportation Geotechnics, vol. 2, pp. 56-64.

White, G & Gnanendran, C, T 2005, ‘The influence of compaction method and density on the strength and modulus of cementitiously stabilised pavement materials’, International Journal of Pavement Engineering, vol. 6, no. 2, pp. 97-110.

White, G & Gnanendran, C, T 2005, ‘The characterisation of cementitious insitu stabilised pavement materials: The past, the present and the future’, Road and Transport Research, vol. 11, no. 4, pp. 56-69.

White, G & Allman, M 2000, ‘A Review of joint sealant standards and specifications for aircraft pavements’, Road and Transport Research, vol. 9, no. 2, pp. 3-13.

Peer Reviewed Conference Papers

Jamieson, S & White, G 2021, ‘Defining Australian rigid aircraft pavement design and detailing practice’, International Airfield and Highway Pavement Conference, a virtual event, 8-10 June.

White, G, Hall, F & Foster, D 2021, ‘Comparing binder modified with recycled plastic to conventional polymer modified binder’, International Airfield and Highway Pavement Conference, a virtual event, 8-10 June.

White, G, Lourenco, R & Low, J 2021, ‘Stochastic post-construction strength rating of the new runway at Sunshine Coast Airport’, International Airfield and Highway Pavement Conference, a virtual event, 8-10 June.

White, G, Farelly, J & Jamieson, S 2021, ‘Estimating the value and cost of Australian aircraft pavement assets’, International Airfield and Highway Pavement Conference, a virtual event, 8-10 June.

Hall, F. and White, G. 2021 ‘Using local waste plastics in asphalt modification to improve engineering properties of roads’, 36th International Conference on Solid Waste Technology and Management, Annapolis, Maryland, USA, 14-16 March.

White, G 2021, ‘Predicting the migration of modified binder properties during transportsation to remote airport project sites’, 100th Transportation Research Board Annual Meeting: a virtual event, Washington, District of Columbia, USA, 5-29 January.

White, G & Hall, F 2021, ‘Laboratory comparison of wet-mixing and dry-mixing of recycled waste plastic for binder and asphalt modification’, 100th Transportation Research Board Annual Meeting: a virtual event, Washington, District of Columbia, USA, 5-29 January.

White, G & Jamshidi, A, 2020, ‘Extending the use of RAP in airport asphalt resurfacing’, RILEM International Symposium on Bituminous Materials, Lyon France, 14-16 December.

Weir, T & White, G 2020, ‘Comparing laboratory curing and in-pavement curing of a foamed bitumen stabilized base course material’, RILEM International Symposium on Bituminous Materials, Lyon France, 14-16 December.

Weir, T & White, G 2020, ‘Laboratory comparison of in-situ, ex-situ and laboratory produced foamed bitumen stabilized base’, RILEM International Symposium on Bituminous Materials, Lyon France, 14-16 December.

Jamshidi, A & White, G 2020, ‘Comparing compressive and flexural dynamic asphalt modulus by statistical and neural network modelling’, RILEM International Symposium on Bituminous Materials, Lyon France, 14-16 December.

White, G & Hall, F 2020, ‘Comparing wet mixed and dry mixed binder modification with recycled waste plastic’, RILEM International Symposium on Bituminous Materials, Lyon France, 14-16 December.

Jamshidi, A & White, G 2020, ‘The challenges of warm mix asphalt as a nature technology’, 9th International Conference on Maintennce and Rehabilitation of Pavements, Zurich, Switzerland, 1-3 July.

Abouelsaad, A & White, G 2020, ‘Fretting and ravelling of asphalt surfaces for airport pavements: a load or environmental distress?’, Nineteenth Annual International Conference on Highways and Airport Pavement Engineering, Asphalt Technology, and Infrastructure, Liverpool, England, United Kingdom, 11-12 March.

White, G, Kelly, G, Fairweather, H & Jamshidi, A 2020, ‘Theoretical socio-enviro-financial cost analysis of equivalent flexible aircraft pavement structures’, 99th Annual Meeting of the Transportation Research Board, Washington, District of Columbia, USA, 12-16 January.

White, G 2019 ‘Objective evaluation of the practical benefits of asphalt binders modified with recycled plastic’, Asphalt Pavement ‘19, České Budějovice, Czech Republic, 26-27 November.

White, G 2019, ‘A standardised sprayed sealing specification for Australian airports’, 12th Conference on Asphalt Pavements for Southern Africa, Sun City, South Africa, 13-16 October, pp. 806-821.

White, G 2019, ‘How the airport pavement research program is filling the voids in Australian airport pavement technology and practice’, 12th Conference on Asphalt Pavements for Southern Africa, Sun City, South Africa, 13-16 October, pp. 92-109.

White, G 2019, ‘Advances and innovations in flexible airport pavements’, 18th AAPA International Flexible Pavements Conference, Sydney, New South Wales, Australia, 19-20 August.

White, G 2019, ‘Validation of proprietary binders for airport asphalt’, 18th AAPA International Flexible Pavements Conference, Sydney, New South Wales, Australia, 19-20 August.

White, G & Boston, W 2019, ‘Quantifying the cost of different runway overlay designs’, 18th AAPA International Flexible Pavements Conference, Sydney, New South Wales, Australia, 19-20 August.

White, G, Sorensen, L & Jamshidi, A 2019, ‘ Evaluation of glass as a sand replacement in asphalt’, 18th AAPA International Flexible Pavements Conference, Sydney, New South Wales, Australia, 19-20 August.

Jamieson, S & White, G 2019, ‘Stone mastic asphalt as an ungrooved runway surface for Australian airports’, 18th AAPA International Flexible Pavements Conference, Sydney, New South Wales, Australia, 19-20 August.

Kidd, A, Stephenson, G & White, G 2019, ‘Implications of Reheating of Asphalt Mixes on Performance Testing’, 18th AAPA International Flexible Pavements Conference, Sydney, New South Wales, Australia, 19-20 August.

White, G & Balestra, R 2019, ‘Comparing rigid and flexible airport pavement thicknesses designed by different methods’, International Airfield and Highway Pavements Conference, Chicago, Illinois, USA, 21-24 July.

White, G, Menzies, C & Kidd, A 2019, ‘Comparing asphalt properties for samples produced in the laboratory and different production plants’, International Airfield and Highway Pavements Conference, Chicago, Illinois, USA, 21-24 July.

White, G 2019, ‘Performance based evaluation of a crushed rock base course with non-compliant grading’, International Airfield and Highway Pavements Conference, Chicago, Illinois, USA, 21-24 July.

Jamieson, S & White, G 2019, ‘Developing a performance-based specification for stone mastic asphalt as an ungrooved runway surface’, International Airfield and Highway Pavements Conference, Chicago, Illinois, USA, 21-24 July.

Jamshidi, A, White, G, Kurumisawa, K & Jize, M 2019, ‘Development of a matrix analysis methodology for characterization of short-term aging in asphalt binders modified by synthetic wax’, 4th International Conference on Transportation Infrastructure and Materials, Jinan, China, 2-4 July.

White, G & Reid, G 2019, ‘Recycled waste plastic modification of bituminous binder’, 7th International Conference on Bituminous Mixtures and Pavements, Thessaloniki, Greece, 12-14 June, pp. 3-12.

White, G, McLachlan, F & Wallace, S 2019, ‘Comparing Asphalt Preservation Products on a Grooved Runway’, 7th International Conference on Bituminous Mixtures and Pavements, Thessaloniki, Greece, 12-14 June, pp. 375-384.

White, G 2019, ‘Incorporating RAP into airport asphalt resurfacing’, 7th International Conference on Bituminous Mixtures and Pavements, Thessaloniki, Greece, 12-14 June, pp. 543-550.

Jamshidi, A & White, G 2019, ‘Use of recycled materials in pavement construction for environmental sustainability’, Eighteenth Annual International Conference on Pavement Engineering, Asphalt Technology and Infrastructure, Liverpool, England, United Kingdom, 27-28 February.

White, G & Kitchen, R 2019, ‘Parametric comparison of the whole of life cycle cost of rigid and flexible aircraft pavements’, Eighteenth Annual International Conference on Pavement Engineering, Asphalt Technology and Infrastructure, Liverpool, England, United Kingdom, 27-28 February.

White, G 2019, ‘Evaluating recycled waste plastic modification and extension of bituminous binder for asphalt’, Eighteenth Annual International Conference on Pavement Engineering, Asphalt Technology and Infrastructure, Liverpool, England, United Kingdom, 27-28 February.

White, G 2019, ‘Zero-waste runway rehabilitation a Whitsunday Coast Airport’, 98th Annual Meeting of the Transportation Research Board, Washington, District of Columbia, USA, 13-17 January.

White, G & Barbeler, A 2018, ‘Evaluating falling weight deflectometer back calculation software for aircraft pavement strength rating’, GeoMEast Conference, Sustainable Civil Infrastructures: Recent Developments in Pavement Design, Modeling and Performance, Cairo, Egypt, 24-28 November, pp. 64-83.

White, G 2018, ‘Foamed bitumen base for expedient airport pavement upgrade: a case study on Whitsunday Coast Airport’, GeoMEast Conference, Sustainable Civil Infrastructures: Recent Developments in Pavement Design, Modeling and Performance, Cairo, Egypt, 24-28 November, pp. 94-111.

White, G & Jamieson, S 2018, ‘Introduction of stone mastic asphalt to Australian runways’, 1st International Conference on Stone Matrix Asphalt, Atlanta, Georgia, USA, 5-7 November.

Jamshidi, A & White, G 2018, ‘Summary of Strategies of the Analysis and Structural Design of Concrete Block Pavements’, 12th International Conference on Concrete Block Pavement, Seuol, South Korea, 16-19 October.

White, G 2018, ‘Regional airport pavement challenges and innovations’, IPWEA Annual Conference, Institute of Public Works Engineering Australasia, Gold Coast, Brisbane, Australia, 10-12 October.

White, G 2018, ‘Design and Construct Contracts for Airport Asphalt Resurfacing’, 5th GeoChina International Conference, HangZhou, China, 23-25 July.

White, G 2018, ‘Use of Falling Weight Deflectometer for Airport Pavements’, 5th GeoChina International Conference, HangZhou, China, 23-25 July.

White, G 2018, ‘Foamed bitumen base for airport pavements’, 28th ARRB International Conference, Brisbane, Queensland, Australia, 30 April to 2 May.

White, G & Deilami, S 2018, ‘Review of reflective cracking mechanisms and mitigations for airport pavements’, 28th ARRB International Conference, Brisbane, Queensland, Australia, 30 April to 2 May.

White, G & Reid, G 2018, ‘Recycled waste plastic for extending and modifying asphalt binders’, 8th Symposium on Pavement Surface Characteristics (SURF 2018), Brisbane, Queensland, Australia, 2-4 April.

White, G & Jamshidi, A 2017, ‘Incorporating environmentally sustainable asphalt surfaces into airport pavements’, 4th International Symposium on Asphalt Pavements & Environment, Toyosu, Tokyo, Japan, 20-21 November.

White, G 2017, ‘Towards a performance-based airport asphalt specification, International Conference on Highway Pavements and Airfield Technology, Philadelphia, Pennsylvania, USA, 27-30 August.

White, G 2017, ‘Development of a performance specification for airport asphalt’, 17th AAPA International Flexible Pavements Conference, Melbourne, Victoria, Australia, 13-16 August.

White, G 2017, ‘Binder for airport asphalt surfacing’, 17th AAPA International Flexible Pavements Conference, Melbourne, Victoria, Australia, 13-16 August.

White, G & Embleton, K 2017, ‘Validation of a new generation bitumen for airport asphalt’, 17th AAPA International Flexible Pavements Conference, Melbourne, Victoria, Australia, 13-16 August.

Laws, N, Westaway, K, Yeaman, J & White, G 2017, ‘Characterising Brisbane asphalt mixtures for dynamic modulus’, 17th AAPA International Flexible Pavements Conference, Melbourne, Victoria, Australia, 13-16 August.

White, G 2017, ‘Challenges for rigid airfield pavements in Australia’, 4th ASCP Concrete Pavements Conference, Kingscliff, NSW, Australia, 16-18 July 2017.

White, G 2017, ‘Challenges for Managing Australian Airport Pavements’, World Conference on Pavement and Asset Management, Baveno, Italy, 12-16 June.

White, G 2017, ‘Managing Skid Resistance and Friction on Asphalt Runway Surfaces’, World Conference on Pavement and Asset Management, Baveno, Italy, 12-16 June.

White, G 2017, ‘Managing the impact of more demanding aircraft’, 10th International Conference on the Bearing Capacity of Roads, Railways and Airfields, Athens, Greece, 28-30 June.

White, G 2017, ‘Expedient runway upgrade technologies’, 10th International Conference on the Bearing Capacity of Roads, Railways and Airfields, Athens, Greece, 28-30 June.

White, G & Smith, W 2017, ‘Comparing near surface aircraft pavement responses calculated by finite element and layered elastic methods’, 10th International Conference on the Bearing Capacity of Roads, Railways and Airfields, Athens, Greece, 28-30 June.

White, G 2016, ‘Potential Causes of Top-down cracking of Australian runway surfaces’, 27th ARRB Conference, Melbourne, Victoria, Australia, 16-18 November.

White, G 2016, ‘Changes in Australian paving-grade bitumen: are they real and what should Australia do about it?’, 27th ARRB Conference, Melbourne, Victoria, Australia, 16-18 November.

McCallum, A & White, G 2016, ‘Engineered pavements of snow and ice’, International Conference on Snow Engineering, Nantes, France, 14-17 June.

White, G 2016, ‘Impac t of new high inflation pressure aircraft tyres on asphalt overlay interface debonding’, 8th RILEM Conference on Mechanisms of Cracking and Debonding in Pavements, Nantes, France, 7-9 July.

White, G & Gabrawy, T 2016, ‘Advanced characterisation methods for interface shear resistance for airport overlays’, 8th RILEM Conference on Mechanisms of Cracking and Debonding in Pavements, Nantes, France, 7-9 July.

White, G 2016, ‘The contribution of asphalt mastic to shear resistance’, 6th Eurasphalt & Eurobitume Congress, Prague, Czech Republic, 1-3 June.

White, G & Thompson, M 2016, ‘Australian airport asphalt surface treatments’, 6th Eurasphalt & Eurobitume Congress, Prague, Czech Republic, 1-3 June.

White, G 2015, ‘Adequacy of runway asphalt overlay interface construction’, 16th AAPA International Flexible Pavement Conference, Gold Coast, Queensland, Australia, 13-16 September.

White, G & Embleton, K 2015, ‘Next generation binder for airport asphalt’, 16th AAPA International Flexible Pavement Conference, Gold Coast, Queensland, Australia, 13-16 September.

White, G 2014, ‘Cyclic shear deformation of asphalt at Melbourne airport’, FAA World Wide Airport Technology Transfer, Galloway, New Jersey, USA, 5-7 August.

White, G 2014, ‘Statistical analysis of in-service evolution of an airport asphalt surfacing’, FAA World Wide Airport Technology Transfer, Galloway, New Jersey, USA, 5-7 August.

White, G 2014, ‘Verification of warm mix asphalt as a runway surfacing for Australian airports’, 13th International Conference on Pavement Engineering and Infrastructure, Liverpool, England, UK, 26-27 February.

White, G 2013, ‘Developing warm mix asphalt for airports’, 15th International Flexible Pavement Conference, Brisbane, Queensland, Australia, 22-25 September.

White, G 2010, ‘Spray seals for airports’, 2nd International Sprayed Sealing Conference, Melbourne, Victoria, Australia, 10-12 October.

White, G 2009, ‘A probabilistic approach to flexible aircraft pavement thickness determination’, 8th International Bearing Capacity of Road, Railways and Airfields Conference, Champaign, Illinois, USA, 29 June to 2 July, pp. 889-895.

White, G 2008, ‘Recalibration of airport pavement structural design system’, 2008 Airfield and Highway Pavements Specialty Conference, Seattle, Washington, USA, 16-18 October.

White, G 2008, ‘Developments in proof rolling of granular layers in aircraft pavements in Australia’, 6th International Conference on Road and Airfield Pavement Technology, Sapporo, Japan, 20-23 July.

White, G 2008, ‘Lessons learnt from ten years of maintenance on Defence aircraft pavements in Australia’, 7th International Conference on Managing Pavement Assets, Calgary, Alberta, Canada, 24-28 June.

White, G 2008, ‘Pavement options for an airport parking apron at an international airport in Australia’, 7th International Conference on Managing Pavement Assets, Calgary, Alberta, Canada, 24-28 June.

White, G 2008, ‘Use of fuel resistant asphalt for aircraft pavement surfaces in Australia’, 2007 AAPA Pavements Industry Conference, Sydney, New South Wales, Australia, 22-24 October.

White, G 2008, ‘Bituminous surfaced pavement maintenance for remote airfields in Australia’, 2007 AAPA Pavements Industry Conference, Sydney, New South Wales, Australia, 22-24 October.

White, G 2007, ‘Towards calibration of APSDS for six wheel gear loads’, 2007 FAA Worldwide Airport Technology Conference and Exposition, Atlantic City, New Jersey, USA, 15-18 April.

White, G & McCullagh, P 2006, ‘Upgrade of an Australian Defence airfield for the introduction of Code E aircraft’, 2006 Airfield and Highway Pavements Specialty Conference, Atlanta, Georgia, USA, 1-3 May.

White, G 2006, ‘Material equivalence for flexible aircraft pavement thickness design’, 2006 Airfield and Highway Pavements Specialty Conference, Atlanta, Georgia, USA, 1-3 May.

White, G 2005, ‘Design of proof rolling regimes for heavy duty aircraft pavements’, 7th International Conference on the Bearing Capacity of Roads, Railways and Airfields, Trondheim, Norway, 27-29 June.

White, G 2005, ‘Selection of input parameters for layered elastic design of flexible aircraft pavements’, 7th International Conference on the Bearing Capacity of Roads, Railways and Airfields, Trondheim, Norway, 27-29 June.

White, G & Gnanendran, C 2005, ‘Characterisation of cementitiously stabilised pavement materials – The Australian Experience’, 7th International Conference on the Bearing Capacity of Roads, Railways and Airfields, Trondheim, Norway, 27-29 June.

White, G 2005, ‘A sensitivity analysis of APSDS, an Australian mechanistic design tool for flexible aircraft pavement thickness determination’, First European Aircraft Pavement Workshop, Amsterdam, Netherlands, 11-12 May.

White, G & Gnanendran, C 2003, ‘Variability in unconfined compression strength of pavement materials stabilised with cementitious binders’, 21st ARRB Transport Research and 11th Road Engineering Association of Asia and Australia Conference, Cairns, Queensland, Australia, 18-23 May.

White, G & Allman, M 2001, ‘Performance evaluation of joint sealants for aircraft pavements’, Proceedings 20th ARRB Conference, Melbourne, Victoria, Australia, 19-21 March.

Theses and Dissertations

White, G, W 2015, Systematic Diagnosis of Factors Leading to Cyclic Shear Creep of Airport Asphalt Surfaces, A Dissertation submitted to the Faculty of Science, Health, Education and Engineering, University of the Sunshine Coast, for the Award of Doctor of Philosophy, August.

White, G, W 2007, An Investigation of the Australian Layered Elastic tool for Flexible Aircraft Pavement Thickness Design, A Thesis submitted to the Faculty of Built Environment and Engineering, Queensland University of Technology, for the Award of Master of Engineering, July.

White, G, W 2006, Laboratory Characterisation of Cementitiously Stabilised Pavement Materials, A Thesis submitted to the School of Aerospace, Civil & Mechanical Engineering, University of New South Wales at the Australian Defence force Academy, for the Award of Master of Engineering, August.

White, G 1999, Aircraft Pavement Joint Sealants – Standards, Specifications and Materials, A Thesis submitted to the Department of Civil Engineering, University of Newcastle, for the Award of Master of Engineering in Civil Engineering, December.

White, G, W 1997, Investigation of Fuel Farm Contamination at RAAF Base Williamtown, A Thesis submitted to the University of New South Wales at the Australian Defence force Academy, for partial completion of Bachelor of Civil Engineering, October.